Vehicle Relearn
The following information must be followed carefully to allow the vehicle to correctly learn the new sensor IDs:
Relearn Type: AUTO-SELF
Set the tyre pressure to the placard pressure
Read all sensor IDs
Park the car for 15 minutes
Drive until the new sensor ID's are learned by the ECU
Relearn Type: OBDII
Set tyre pressure
Read all sensor IDs
Turn ignition to ON (engine off) or by pushing rapidly twice on ON/START (With remote keyless entry)
Connect the OBDII Cable/Module to OBD connector
Follow the screen's instructions to reset the ECU
Turn ignition to OFF then ON (engine off)
Wait for 5 minutes
NOTICE: If the TPMS warning light remains ON, drive for 20 min
OBDII Port Location*
*The location shown is for left-hand drive vehicles.
| Make | Genesis |
|---|---|
| Model | G70/Shooting Brake |
| Model Code | |
| Date of Manufacture | 2024 |
| OE Sensor Manufacturer | Schrader |
| OE Sensor Number | 52940N1000 |
| OE Sensor Description |
Choose a sensor type:
Other Programmable Sensors
SCH-S163
Schrader EZ 2.0 Snap-In Sensor - EU 433Mhz
SensorSchraderBarcode: 5055563005516
Comparative Parts: SCH-S163, 72-20-844, 73-20-844, HSCH-S163, 1210, 5055563005516,
SCH-S164
Schrader Delta EZ 2.0 Clamp-In Sensor - EU 433Mhz
SensorSchraderBarcode: 5055563005523
Comparative Parts: SCH-S164, 72-20-845, 73-20-845, HSCH-S164, 2200, 5055563005523,
Schrader programmable EZ-Sensor 2.0 433Mhz EU.
Requires a TPMS diagnostic tool to program the sensor for a particular vehicle.
SCH-S165
Schrader Faraday EZ 2.0 Clamp-In Sensor - EU 433Mhz
SensorSchraderBarcode: 5055563005530
Comparative Parts: SCH-S165, 72-20-846, 73-20-846, HSCH-S165, 2210, 5055563005530,
SCH-S535
Schrader Pre-Programmed EZ Delta Clamp-In Sensor
SensorSchraderBarcode:
Comparative Parts: SCH-S535, 72-22-047, 2200-GO1, TECHSCH-S535,