Vehicle Relearn
The following information must be followed carefully to allow the vehicle to correctly learn the new sensor IDs:
Relearn Type: OBDII
Set tyre pressure
Read all sensor IDs
Turn ignition to ON (engine off) or by pushing rapidly twice on ON/START (With remote keyless entry)
Connect the OBDII Cable/Module to OBD connector
Follow the screen's instructions to reset the ECU
Turn ignition to OFF then ON (engine off)
Wait for 5 minutes
NOTICE: If the TPMS warning light remains ON, drive for 20 min
OBDII Port Location*
*The location shown is for left-hand drive vehicles.
Relearn Type: DEALER-ONLY
The vehicle must be returned to the dealership to complete the relearn.
| Make | Peugeot |
|---|---|
| Model | 807 |
| Model Code | V2;EB |
| Date of Manufacture | 2002 |
| OE Sensor Manufacturer | Schrader |
| OE Sensor Number | 543002 |
| OE Sensor Description |
Choose a sensor type:
Other Programmable Sensors
ALI-S113
Alligator Sens.It Clamp-In Sensor 433MHz
SensorAlligatorBarcode: 5055563003345
Comparative Parts: ALI-S113, 72-20-085, 73-20-085, HALI-S113, 590914, 5055563003345, 5624000,
Alligator programmable Sens.It sensor 433Mhz.
Requires a TPMS diagnostic tool to program the sensor for a particular vehicle.
ALI-S114
Alligator Sens.It Snap-In Sensor 433MHz
SensorAlligatorBarcode: 5055563003352
Comparative Parts: ALI-S114, 72-20-086, 73-20-086, HALI-S114, 590918, 5055563003352, 5624002,
Alligator programmable Sens.It sensor 433Mhz.
Requires a TPMS diagnostic tool to program the sensor for a particular vehicle.
SCH-S163
Schrader EZ 2.0 Snap-In Sensor - EU 433Mhz
SensorSchraderBarcode: 5055563005516
Comparative Parts: SCH-S163, 72-20-844, 73-20-844, HSCH-S163, 1210, 5055563005516,
SCH-S164
Schrader Delta EZ 2.0 Clamp-In Sensor - EU 433Mhz
SensorSchraderBarcode: 5055563005523
Comparative Parts: SCH-S164, 72-20-845, 73-20-845, HSCH-S164, 2200, 5055563005523,
Schrader programmable EZ-Sensor 2.0 433Mhz EU.
Requires a TPMS diagnostic tool to program the sensor for a particular vehicle.
SCH-S165
Schrader Faraday EZ 2.0 Clamp-In Sensor - EU 433Mhz
SensorSchraderBarcode: 5055563005530
Comparative Parts: SCH-S165, 72-20-846, 73-20-846, HSCH-S165, 2210, 5055563005530,
SCH-S535
Schrader Pre-Programmed EZ Delta Clamp-In Sensor
SensorSchraderBarcode:
Comparative Parts: SCH-S535, 72-22-047, 2200-GO1, TECHSCH-S535,
Click an image to show the correct service parts for that type:
Service Parts For: Schrader Gen 2/3 Clamp-In Sensor
Show Products With Tags:
AM Parts
TYR-K003_10
Box Of 10 Service Kits for Schrader Gen 2/3
Most Popular Service KitSchraderAM PartBarcode: 6924478964135
Comparative Parts:
A box of 10 service kits, with each including: 1 Nut, 1 Rubber Grommet, 1 Valve Cap and 1 Valve Core.
These service kits are suitable for use with Schrader Gen 2/3 type sensors.
TYR-K004_10
Box Of 10 Service Kits for Schrader Gen 2/3
Service KitSchraderAM PartBarcode: 6924478961189
Comparative Parts:
A box of 10 service kits, with each including: 1 Nut, 1 Rubber Grommet, 1 Valve Cap and 1 Valve Core.
These service kits are suitable for use with Schrader Gen 2/3 type sensors.
OE Parts
SCH-K003_10
Box Of 10 Service Kits for Schrader Gen 2/3
Service KitSchraderOE PartBarcode: 5055563000634
Comparative Parts:
A box of 10 Schrader service kits, with each including: 1 Nut, 1 Rubber Grommet, 1 Valve Cap and 1 Valve Core.
These service kits are suitable for use with Schrader Gen 2/3 type sensors.